Subject: Fuel Pump - Was: Mark Suspinski crash and fire.
From: Rotary Engine
Date: 9/12/2010, 7:59 PM
To: AAA Put this in the To box



 How does the engine look?
 Do you have any guesses on why did it caught fire?

 Paul


 No question at all about why it caught fire -- those damn plastic ends on
 the MSD fuel pumps snapped off & fuel was being hosed into the cowling
 post
 crash.  The hottest part of the fire was right at the fuel pumps.
 Terry was
 trying to go around when he lost it - thus both pumps were on and
 running at
 impact.

 I really think those MSD fuel pumps should not be used by anyone
 because of
 the plastic elements.  As you'll remember, I dropped one & the plastic
 shattered on that one too.

 Rotor 1 is shot.  The p-port got torn loose and shoved into the rotor
 chamber while the engine was still turning.  I expect to find the apex
 seals
 shattered & the chamber shot.

 I cant get the damn e-shaft nut off so it will b a while before I get
 around
 to tearing it down.

 mrs


 I don't know why we have to crash to find out stuff like this fuel pump.
 I was advocating these things until this happened. I sent a copy of this
 email to MSD.

 http://www.jegs.com/i/JEGS/555/15913/10002/-1?parentProductId=937089


 This P-port was one of our early epoxy bonded in versions. That was the
 first and last one done like that. New ones are stainless steel welded
 in.
 It will take a direct axial heavy impact to shove one of those into the
 rotor housing.

 Paul Lamar

 Here's an all metal alternative
 http://www.summitracing.com/parts/HLY-12-927/?rtype=10

 Bob Mears


 I don't think that is high pressure EFI. I think that is
 throttle body injection at 15 psi.
 http://www.holley.com/12-920.asp

 What you are looking for is a true roller vane pump that will lift
 a head of fuel. Important for low wing airplanes.

 Paul Lamar

The Bosch Cis efi fuel pumps are all steel with threaded bosses for the
fuel lines. They are well tested millions made. Some even have a check
valve in the outlet. Roller vane.
   Very high quality. I mentioned this on this web site many years ago.
No one paid any attention.


chris smale



You guys really should be using the pump recommended by the maker of the
injection system (Tracy Crook) - the Walbro 394 or equavelent.  They are
inexpensive, all metal, have threaded fittings for any type of adapter, have
a built-in spring loaded check valve, and weigh only a pound.  They have
worked well for me for 500 hrs.  It turns out that they also made the
perfect solution for a pump for my smoke system.  So my plane flies with 3
of them.

Available via many suppliers, here is an example:
http://www.inlinefuelpumps.com/

-- 
David Leonard

Turbo Rotary RV-6 N4VY
http://N4VY.RotaryRoster.net
http://RotaryRoster.net

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.