There was a liquid cooled starter/generator shown on the web a couple
weeks
ago, does any one still have the details?
Milo
Drag this rotary stuff over to a folder Milo.
Huge hard drives are cheap.
http://www.srdrives.com/starter-generator.shtml
http://www.cpowert.com/products/speedstart.htm
Paul Lamar
--
Milo,
I've sent several emails to this organization requesting
weight size and projected production date.
No luck in receiving a response yet.
Doug in Japan
You have got to appear like Government Motors :)
I think the whole idea has fallen into disfavor as
I think GM tried to use them as a hybrid motor.
It made a piss poor hybrid.
If you build them strong enough to act as a hybrid motor
they are too expensive to use as an alternator/starter.
Classic case of defective economic green blindness :)
IMHO the same thing will happen to the Volt.
Paul Lamar
We have emailed them, But I guess now we will not get a response. For
sometime we have had a customer who is interested in a turbo coupled to
drive the starter/generator directly from the rear end, an inline
combination unit sort of. Their thinking is to do away with the individual
units, use the turbo to deaden the sound, exstract heat in the exhaust
system, and use a straight exhaust, and add a little hp to the engine shaft.
But we need to locate the individual, matched components to make this
happen. Milo(Aero Kinetics, Inc.)
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.