Subject: Where can one buy a 4 rotor
From: Rotary Engine
Date: 9/29/2010, 8:17 PM
To: AAA Put this in the To box


  George,

      Where could I buy a 4 rotor?

  Gene Kahn

  Gene,  All the listings of running engines I find are based on the  same
  kit from     www.kiwi_re.com which has a retail price of $9800 dollars
  US.  There is also shipping from new Zealand.  A shop in Florida
  advertised
  engines less the exhaust header for $21,000 and the add stated new Mazda
  parts are used such as the rotor housings and renesis rotors. They may
  use
  relapped end housings and used front accessory cover and parts.  I would
  e-mail  kiwi_re  to get a list of US shops installing the kits, or
  contact
  Bruce Terrentine to see if he would assemble one for you if you supply
  the
  kit. The one  pictured in the attachment was on E-Bay recently.
  I saw two types of e-shafts available. One is assembled like a 3 rotor
  except that you are adding a two lobe section instead of one. The second
  variant has added bearings to the housings which don't have stationary
  gears
  which as I recall is how kiwi_re does it.

            I was doing a search on yahoo for "4 rotor eccentric shaft"  to
  see options on connecting two stock e-shafts and found listings of 4 rotor
  engines.The 4 rotor engines are used in drag racing and some drifter and
  street cars none were in aircraft. For continuous WOT operation you will
  need parallel cooling. Trying to cool 4 rotors in series with 400+ HP
  would
  concern me.

  george grimes



 Gene,
           There is an unknown supply in OZ if he can get the time to
 deliver.  Makes a beautiful and very reliable job.  I have a photo of one
 of
 his creations.  Rohan Ambrose of Exteme Rotaries
  www.xtremerotaries.com    Keep asking as he is very busy with no
 secretary, so just keep sending emails.  Neil in OZ   He is in Melbourne
 Vic.

 Gene, kiwi_re  also sells complete engines. They discontinued the 12A based
 version and now are selling 3 versions based on 13B components. They have
 side port, P-port, and P-port turbo engines.  HP is 500,650,900 for the
 three versions. The prices are in NZ dollars.  $19,700 for the 500HP
 ($28,000 in NZ currency).    The forums from drifter car users indicate it
 is well built and reliable but they are not running WOT like an airplane.
 Pictures they have posted show a remote water pump plus an inline stewart
 pump connected to the stock outlets. I have read that parallel cooling is
 also available from some builders using this kit.


     I will attempt to attach some installed pictures and one of their
 P-port housings under construction. The file names made sense when I saved
 them but down the road it is just a guess. I haven't found the dry sump
 source yet so I may not have saved a picture since I am going to use a 5
 stage nascar style cog belt driven pump.


george grimes


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.