George,
Where could I buy a 4 rotor?
Gene Kahn
Gene, All the listings of running engines I find are based on the
same
kit from
www.kiwi_re.com which has a retail price of $9800
dollars
US. There is also shipping from new Zealand. A shop in Florida
advertised
engines less the exhaust header for $21,000 and the add stated new
Mazda
parts are used such as the rotor housings and renesis rotors. They
may
use
relapped end housings and used front accessory cover and parts. I
would
e-mail kiwi_re to get a list of US shops installing the kits, or
contact
Bruce Terrentine to see if he would assemble one for you if you
supply
the
kit. The one pictured in the attachment was on E-Bay recently.
I saw two types of e-shafts available. One is assembled like a 3
rotor
except that you are adding a two lobe section instead of one. The
second
variant has added bearings to the housings which don't have
stationary
gears
which as I recall is how kiwi_re does it.
I was doing a search on yahoo for "4 rotor eccentric
shaft" to
see options on connecting two stock e-shafts and found listings of 4
rotor
engines.The 4 rotor engines are used in drag racing and some drifter
and
street cars none were in aircraft. For continuous WOT operation you
will
need parallel cooling. Trying to cool 4 rotors in series with 400+ HP
would
concern me.
george grimes
Gene,
There is an unknown supply in OZ if he can get the time to
deliver. Makes a beautiful and very reliable job. I have a photo
of one of
his creations. Rohan Ambrose of Exteme Rotaries
www.xtremerotaries.com Keep asking as he is very busy with no
secretary, so just keep sending emails. Neil in OZ He is in
Melbourne
Vic.
Vic,
Thank you very much for that lead!
Gene Kahn
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.