Paul
Tel me how the driver shaft is attached to the sun gear on
Tracy is pressure fit ,welded or others??
i still waiting the shipment of gears
Jean Prudhomme
Pressure fit and then two welded in 1/4 or 5/16 pins welded
in 90 degrees apart. He used to use one and Dave Leonard
broke it with his turbo.
Paul Lamar
Do you think Paul
Dave took somes photos of broken sun gear shaft and do you have more clearly
photos showing the shaft attached to the gear
Jean Prudhomme
Here is what I have Jean.
Paul Lamar
--
Paul I receive all the gears components but i guess i do have the wrong sun
gear for this application it fit on the planet but if i look yous is all the
same outside diameter and i guess it,s a weak point at the big groove
I do have the Slauson catalogue, could tell me which part number it can be
Jean Prudhomme
I don't have the catalog here. I'll be home in a couple
of days. That looks like the right part. If it does not fit
You may have the wrong planet carrier.
Grind or cut off the teeth on the end you don't use.
The weak point is not the groove. It is always the root
of the tooth.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.
