Subject: Jeff motor mount plate with mini sprint bell.
From: Rotary Engine
Date: 10/7/2010, 3:58 PM
To: AAA Put this in the To box

One must plan ahead for the motor mount
when designing a psru.
Here is what the Mini Sprint bell will look
like when combined with Jeff's motor mount plate.

I uses Jean's dwg to scale a Rhino file on the Mini Sprint
Bell. Estimated weight of the bell alone is 6.7 pounds.
Some of that may be removed by machining.
Tracy Housing is is 8.5 pounds.

BTW if any body needs a custom 4130 tube motor mount to go along
with Jeff's plate I found a local tig welder that can make them
and that I can work with. He can read and follow dwgs :)
Estimated cost is $500 to $1000.

He already built a large SS muffler for our race car.

Paul Lamar.

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.