Subject: Jeff motor mount plate with mini sprint bell.
From: Rotary Engine
Date: 10/7/2010, 7:13 PM
To: AAA Put this in the To box

 One must plan ahead for the motor mount
 when designing a psru.
 Here is what the Mini Sprint bell will look
 like when combined with Jeff's motor mount plate.

 I uses Jean's dwg to scale a Rhino file on the Mini Sprint
 Bell. Estimated weight of the bell alone is 6.7 pounds.
 Some of that may be removed by machining.
 Tracy Housing is is 8.5 pounds.

 BTW if any body needs a custom 4130 tube motor mount to go along
 with Jeff's plate I found a local tig welder that can make them
 and that I can work with. He can read and follow dwgs :)
 Estimated cost is $500 to $1000.

 He already built a large SS muffler for our race car.

 Paul Lamar.

     Paul
Could you tell me how much clearance space behind jeff plate and
the insert spline bushing in the flywheel

Jean Prudhomme
                   
I don't have that dimension. The shaft is up at the hangar.
The spacers however are 3.050 inches long as I recall.

This dwg is not far off scale.

Paul Lamar


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.