Does anybody know how the wiring goes for the four individual coils on the
Renesis engine. It is one of the test engines bought up by that Australian a
couple of years ago.
There are three wires (black, black with white stripe and the third wire is
a different color for each coil). The coils black wires are all wired
together with a 0.47uf capacitor attached at the splice, and  the
black/white wires are also wired together but the wire coming out was cut
off at the splice.    -- Karibian

Black with white stripe is 12 volt power
The third wires are triggers from the computer
as follows.

G is green front rotor leading (lower) plug.
W is white front rotor trailing (top) plug.
Y/G yellow / green is back rotor leading plug.
B/O blue /orange is back rotor trailing plug.


Black is ground.

Paul Lamar