Subject: Gear box for Pusher Twin
From: Rotary Engine
Date: 10/13/2010, 8:59 PM
To: AAA Put this in the To box



Paul


I did cut down on weight for my housing to adapt to a
transmission bell housing ,i include some notes for the bearings
i am projecting to use,
I finished with ALIBRE now i will switch to Rhino and i will
have to learn it but lot of command seems to be similar as
ALIBRE
I bought the program as student at $49.00 and registered as
member of EAA and they shipped it without any questions.
I made a hand modification suggestion to fit with Jeff's plate,
it can attached to the same place as the Speed eng housing but i
don't know if it,s enough space to the flywheel.


Jean Prudhomme

Here are the dimensions on Tracy's input shaft.    

Paul Lamar                   

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.