Lotta big round engines from B-29/50 to B-36 on display and also
many other piston types not SAC oriented both domestic and foreign.
Wrenchhead heaven for me anyway.
Al Koivisto
I am interested in B36 engine pictures if you go again. Especially
the turbo charger systems. Rumor had it the B36 could climb higher
than the jets at the time.
Paul Lamar
I have photos stashed away somewhere of cut-away P&W R-4360
28-cylinder 4-row radial. I'll try and locate. Might be easier
to ride to Omaha. Last issue EAA sport Aviation had article about
DC-7B with sidebar about turbo compound Wright R-3350 which utilized
three "power recovery turbines" driving crankshaft via fluid
couplings as quoted in article. Now has me wondering how power
recovery applied to R-4360.
I think the Navy version DC-7B a C-118. Flew on similar
aircraft Norfolk to Guantanamo back in '72. Not cush like DC-7B.
Box lunch, noisey oil-spewing engines, zig-zagging between
thunder heads entire trip. Better than C-140 though as you at
least get a window.
Meanwhile back to rotaries, I've been offered a '86 RX-7 at no
charge and am considering the possibility of shoe-horning motor
into a "R" series BMW motorcycle. BMW drive train seems to lend
itself to this conversion. Ever hear of this being done? Should
make a quick bike! 80's era boxer one liter "Airheads" were good
for maybe 50 rear wheel horsepower.
Sincerely,
Al Koivisto
It is a lot easier getting the engine in the motor cycle
than it is getting enough rad in there to cool it.
Here are some shots of one taken at Seven Stock a few years
ago. I don't think this fellow ever solved the cooling
problem.
My friend Emon Hurley stepped off a supercharged RO80
powered bike at 156 MPH 25 years ago and lived to tell
the tale.
http://www.hurleyrotary.com/concord.php
"As Hurley Engineering accumulated NSU Rotary Engines, they
decided to build the rotary engined dragbike, named Concord.
Initially getting through 2-3 engines per weekend, they soon
learnt how to make the rotary engine more reliable and in the
end were getting 400 BHP at 11,000 RPM and winning races! Their
best time was in 1982, 8.2 at 164MPH. The last run was in 1986
when they crashed at 156MPH (fortunately no bones broken
though!)"
Paul Lamar
I remember something from years ago about a Dutchman putting rotor motors in
bikes. I think they were mounted transversly.
Dale Davies
You are aware of course that Suzuki and others built
rotary powered Motor Cycles.
http://www.youtube.com/watch?v=SkPeB1rAagU
http://www.youtube.com/watch?v=biYUqHpOq9c
http://www.youtube.com/watch?v=Ylyz2Mmsuz0
Some say the Norton is being resurrected.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.