Hello Paul,
Do the parts in the attached photo appear to be part of the
motor mount? I can't match them to a Zenith part (at least
not yet). Each is 6 inches long. The center section is solid
bar stock with bolt holes through the (tube) weldment at the
top and at the bottom of the bar.
Thanks,
William
I have no idea. They do not look like part of the motor
mount. Any Zenith builders out there recognize these?
These are the motor mount pictures Jerry sent.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.