Hello Paul,

Do the parts in the attached photo appear to be part of the
motor mount? I can't match them to a Zenith part (at least
not yet). Each is 6 inches long. The center section is solid
bar stock with bolt holes through the (tube) weldment at the
top and at the bottom of the bar.

Thanks,

William

I have no idea. They do not look like part of the motor
mount. Any Zenith builders out there recognize these?

These are the motor mount pictures Jerry sent.

------------------------------------------------

BTW I have a book out William called "How To Cool
Your Wankel". AC Spruce sells it for about $70.
If you want one I have a special for new subscribers
of $30 cash money plus $3 mailing. No checks... no credit
cards. Green U.S. cash money only. Domestic only.
Gold coins are OK :)

Send the cash registered if you wish to:

Paul Lamar
830 East Santa Maria St.
Suite 303  very important!!!!!
Santa Paula Calfornia
93060

send the cas

Paul Lamar

       
those are standard parts for ANY out of the box engine stand.
Usually these parts are used to connect the engine to the square
slotted plate in the engine stand


look here to see what I mean...

http://www.northerntool.com/images/product/images/790026_lg.jpg

not part of the mount, not zenith, cheap tool part, that's all.

Bill Mason
rv7 13b...  in progress               


Thanks Bill. Now I see clearly :)

Paul Lamar