Subject: "Miracle Engine?" Possible military rotary diesel
From: Rotary Engine
Date: 10/22/2010, 10:08 AM
To: AAA Put this in the To box



http://www.theregister.co.uk/2010/10/21/transformer_tx_engine_deal/

Kenny

If it is not a Wankel I'll believe it when I see it.
New rotary engine designs appear once a month.

Rotary engines have been around for hundreds of years.
Felix Wankel put most of his life into finding the right
combination.

The only one that works is the Wankel and that only happened
becasue Mazda put billions of yen into R&D.

By Kenichi Yamamoto from his book "Rotary Engine" 1981

1.3     REQUIREMENTS FOR A PRACTICAL ROTARY ENGINE
       Although various types of rotary engines have been
developed to date, there are few that do not qualify as internal
combustion engines or do not qualify as a practical engine even
if they satisfy the qualifications of an internal combustion
engine.
       The requirements for a rotary engine to be qualified
as a practical internal combustion engine can be summed up in
the following five items. The practicality of various ideas on
rotary engines can be judged by evaluating them by these
criteria:

(1) Every moving part, including the timing mechanism, should
make a rotating motion. A mechanism having a reciprocating
inertia will increase mechanical noise and vibration, and will
work against high speed and high revolution.  [In addition
mechanisms that reciprocate generate reversing loads. Reversing
loads lead to reversing stresses. Reversing stresses lead to
metal fatigue and limited life. The Wankel rotary engine has no
reversing stresses therefor the life of the major parts such as the
eccentric shaft and rotor are unlimited unlike, crankshafts, connecting
rods, pistons and poppet valves. Paul Lamar]  Accordingly, structures
that require intake and exhaust valves and mechanisms using the rotors
oscillatory motion are not desirable.

(2)     Gas seals or the working chamber should be three
dimensionally reliable.  The gas seal mechanism of a rotary
engine should be constituted by connecting the individual seals
three dimensionally. Among the many ideas we come across are
those that don't show such three dimensional thoughts.

(3)     Appropriate gas exchange of intake and exhaust should
take place. Together with having a mechanism that can correctly
open and close the ports, sufficient time for intake and exhaust
should be provided especially for high speed and high
revolution.  Among the ideas on rotary engines, there are some
that ignore this point.

(4)     Every component part should have the strength to endure
high speed and high pressure.  As the component parts are
exposed to high pressure, high sliding velocity and high heat
load, every part should have sufficient allowance in size and in
shape.

(5)     Sufficient cooling and lubrication should be provided.
In order to qualify as an internal combustion engine, although
this is related to above (4), durability against high heat load,
high sliding velocity, etc. are required. Therefore, the
structure should be simple, and the ideas on rotor cooling,
lubrication of seal parts, and oil seal structure should be
those that are given adequate thought.
       Also, it is desirable for a practical rotary engine to
have a simple and compact structure. When we evaluate the
various type's of rotary engines devised to date in view of the
above mentioned requirements, the NSU Wankel type rotary engine
is the engine that best satisfies the above mentioned
requirements.

-------------------------------------------------

Paul Lamar

Hi all,

http://starrotor.com/Engines

These folks have an interesting idea that might just work.  I see nothing wrong
with the theory and the materials aspect isn't terribly exotic.  Mostly, it's
the only idea I've seen in years that might match the "rotary diesel" label.
Actually, it should burn any flammable liquid, being a "continuous internal
combustion" design.

 The only hardware they have is the compressor half.  The expander needs to be
made of high temp. materials, obviously.
 They sure picked a terrible time to try and sell their technology,  2008 !

Craig Taylor

Nothing new here. Chrysler built such engines years ago.
In fact the M1 Abrams tank uses a similar engine.
http://conceptengine.tripod.com/conceptengine/id4.html
http://en.wikipedia.org/wiki/Honeywell_AGT1500

Paul Lamar


Paul, the starrotor engine ISN'T a turbine.  It uses a positive displacement
compressor and expander.

Craig Taylor

Well then it must be just another rotary engine of the month :)
Good luck on selling worthless paper :)

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.