Paul-
Here is a video that I edited from the race at the Runoffs. The
software is new to me and I somehow managed to get the audio and
video out of sync. It is a bit annoying, but hopefully - live and learn.
http://www.youtube.com/watch?v=ZQyDEdWqAaM
Attached is a picture of the Miata lifting it's inside tire. After
checking for problems and not finding anything apparent, I put the
car on the scales. The results were something like LF+RR = 875,
RF+LR = 1325, not good for a predominately right turn course. At
some point during the week the ride height moved, not sure why or
how, it has happened before. In getting the ride height back to
target, it must have jacked the weights around. I was going to bring
my scales, but it was the last thing to be packed and I told myself
to stop trying to fit the entire garage in the trailer. Prather told
me he was bringing his scales - but he had taking down his set-up by
the time we were doing this. Seemed like it was a doomed week,
between the bad shock, stretching eccentric bolt in front suspension,
a dragging rear caliper and the variable ride height.
Also attached it the page from Mark Donohue's book that you are mentioned.
Thanks again for all of your help,
Brian
Thanks Brian. That left turn looks good. It would probably over
steer on a right turn. That tells me it needs an even larger front bar
once you get the corner weights right and if that turn is about 60 MPH or so.
Cool video.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.