Hi Paul,
Is it suitable to replace standard Renesis lead battery (12v
70Ah) with Li-Polymer one?
Expert from engine starter company asses that working power of
Renesis starter is around 2kW and starting current (duration max
0.5ms) is around 700A. By the factory standard starter has to
manage 3 times 30 seconds without cooling pause. So battery
capacity has to manage it - my condition for dimensioning
I calculate that 45C 11.1v 15Ah Li-Polymer battery would be
strong enough to fulfill demands. I really do not know if such a
small and light battery is really suitable for starter. It
weighs around 1.3kg/3lb comparable with 18kg/40lb for lead one.
Weight ratio between technologies is around 1:12 and somehow it
is difficult to accept replacement. If this really works it will
be excellent contribution to aircraft weight reduction. Li-Poly
lifetime is about 1/2 lead one and is approx. 3 times more
expensive.
Do you know obstacles for usage of higher voltage around Renesis
engine? I would like to use 28v DC for whole aircraft.
Viktor
Slovenia, Europe
I am no expert but as I recall Lithium Ion batteries require special
computer controlled chargers. Lead Acid batteries do not. Otherwise
you risk blowing up the battery.
Back in the old days (1960's) we used Nickel Cad aircraft batteries
in our Chaparral race cars successfully with no special chargers.
Doug Fir in Japan knows far more about this than I do.
Paul Lamar
http://www.powerstream.com/li.htm
"The basic algorithm is to charge at constant current (0.2 C to
0.7 C depending on manufacturer) until the battery reaches 4.2
Vpc (volts per cell), and hold the voltage at 4.2 volts until
the charge current has dropped to 10% of the initial charge
rate. The termination condition is the drop in charge current to
10%."
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.