There seems to be quite a little composite construction string
going now on the List. I would like to stick my oar in here, but
I have a dilemma and need advice on protocol.
Where I am coming from is that I am completing a fourth book on
composite techniques, an ongoing project of at least ten years.
I'm evidently a slow learner, running up many blind alleys, but I
have hammered out a family of successful techniques that will be
the basis for my forthcoming book. The new book will show
super-easy techniques for mold-making that obsolete similar
techniques shown in my present book. I demonstrated this work at
the San Jose EAA chapters in September.
Fundamentally, I make curved or flat sandwich panels with very
thin skins and very thick cores, vacuum bagged against a
precision mold. They are efficient structures that get raised
eyebrows when demonstrated. Being molded, they have a smooth tool
surface, so do not require external surface finishing, as with
the Rutan derivatives. John Roncz has done a low-speed wing
section for me and I am applying it to an Ultralight. Building a
practical 254 pound airplane is hard to do and requires the
designer to "think light".
What I am seeing on the Rotary List is examples of "re-invention
of the wheel". My dilemma is that I don't want be the nosy
outsider who makes piecemeal and incomplete comments, one little
jab at a time. If I get into describing a method, I want be able
to make a complete and effective job of it.
I have a proposition then: Suppose I send to you a series of
short pieces having to do with composite techniques or the use of
cored skins. Each "short piece" might be somewhat long and out of
context for a List posting, but you might consider it worthy of
posting. Basically, these would be book previews and my
motivation would be to stimulate useful dialog. I think I have
some pretty good stuff, but I'm biased and maybe off-topic.
Would this be practical?
Zeke Smith Aeronaut Press
Yes. No problem Zeke. I want to encourage this topic as we
have a low cost and viable engine and we need lower
cost kits or airplanes. Number each chapter as I have
above so we can keep track of responses.
I have your book Advanced Composite Techniques already
which has influenced my thinking on this subject.
I like that .090" thick fiberglass shower liner idea.
You are doing a good job.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.