Latest pictures of Mark Steitle's Lancair ES powered by
Mazda p-port 3 rotor with slide throttle.
IMHO Mark has one of the best if not the best installations
of a Mazda rotary in any aircraft. Well done Mark.
Paul Lamar
Thanks Paul for the kind words. One of these days I'll have
to get with
it
and finish the interior and paint. Having too much fun flying
for now.
Mark
I think that is a good plan. It will give you time to fine tune
Tracy's EFI. Next chance you get take a picture looking down
on the engine. I would like to see more of the new plenum and
cold air intake.
Paul Lamar
Paul,
Here are two more pics showing both sides of the intake plenum.
Mark
That is really beautiful Mark.
You should have close to 375 HP at 7500 RPM when
you finally get it rich enough. The max climb rate
is the most accurate way of estimating the HP.
Paul Lamar
I'll update the numbers after doing some more tuning. One thing
that I can
report at this time is that it is really smooth cruising along at
6000 rpm and 200 mph. Rotaries Rule!!!
Mark
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.