And now from Hayward Motors in England, a 3 rotor Renesis
using standard width side housing.    Exhaust weld look like they won't last long.


Doug in Japan

You are right about the welds. They should be welded on
the other side of the flange.

Are your sure that is Hayward and not Hurley.
Hurley has been making 3 rotor engines for years using
stock center housings. I was there in June 2005.

Paul Lamar


Paul

On the following discussion group scroll down to the second page and you can find it.


http://www.ausrotary.com/viewtopic.php?f=3&t=152773


Doug in Japan

It looks like they are buying e-shaft parts from Hurley just up the
M4 60 miles to Coventry.


Paul Lamar