Subject: The company that makes engine tube mounts from a solidworks file?
From: Rotary Engine
Date: 11/8/2010, 8:57 PM
To: AAA Put this in the To box


 I was told that there is a Canadian company that will cut and profile
 pipe
 to your solidworks file so when you receive the pipe, it goes together
 quite
 nicely.
 If anyone knows of the company, I would love to have the contact
 information, thanks!
 Bill Holland


 I don't know about a Canadian company but there is one here
 in California. It is called Industrial Metal Supply
 in San Fernando. They have an automated machine that does it.
 I am sure there are now a lot of those machines around.

 http://www.industrialmetalsupply.com/Services/Laser-Metal-Cutting

 ------------------------------------------------------------
 This is a great way to make motor mounts. If more people get
 interested in one particular type of aircraft such as an RV6
 I would consider making up a bunch of mm kits.
 I have 3D dwgs on most kit airplane motor mounts already.
 I will now do a 3d on any airplane design for no cost.

 Paul Lamar

Hey Paul,

Do you have a design for the Zenith Zodiac CH650?  If not, what
information would I need to supply for you to do the design?

Mark LaPierre

Yes so happens I do. In fact the Rhino 3dm file is on the web site
for downloading.
http://www.rotaryeng.net/p-port-eg.zip

What CAD program do your have?.

This is for a light weight all aluminum high buck
rotary. The engine must be moved back for a cast iron
version. Let me know before you go with these dwgs
and I'll do another set.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.