Subject: The company that makes engine tube mounts from a solidworks file?
From: Rotary Engine
Date: 11/9/2010, 5:30 AM
To: AAA Put this in the To box



I was told that there is a Canadian company that will cut and profile
pipe
to your solidworks file so when you receive the pipe, it goes together
quite
nicely.
If anyone knows of the company, I would love to have the contact
information, thanks!
Bill Holland


I don't know about a Canadian company but there is one here
in California. It is called Industrial Metal Supply
in San Fernando. They have an automated machine that does it.
I am sure there are now a lot of those machines around.

http://www.industrialmetalsupply.com/Services/Laser-Metal-Cutting

------------------------------------------------------------
This is a great way to make motor mounts. If more people get
interested in one particular type of aircraft such as an RV6
I would consider making up a bunch of mm kits.
I have 3D dwgs on most kit airplane motor mounts already.
I will now do a 3d on any airplane design for no cost.

Paul Lamar

Hey Paul,

Do you have a design for the Zenith Zodiac CH650?  If not, what
information would I need to supply for you to do the design?

Mark LaPierre

Yes so happens I do. In fact the Rhino 3dm file is on the web site
for downloading.
http://www.rotaryeng.net/p-port-eg.zip

What CAD program do your have?.

This is for a light weight all aluminum high buck
rotary. The engine must be moved back for a cast iron
version. Let me know before you go with these dwgs
and I'll do another set.

Paul Lamar

Be careful here again Paul. The CH650 and CH640 are entirely different aircraft.
The CH650 is based on the CH601.

In the experimental kit version, the CH 650's firewall-forward will accommodate
a Jabiru 3300, Lycoming O-235or -233, or Rotax four-cylinder powerplantsas
alternatives to the S-LSA version's TCM O-200.
http://www.zenithair.com/zodiac/ch650/index.html

The 13b is a bit big for the 650.

C. Smith

Your right. Thanks for catching that C.Smith.
Darn Zenith is hard to keep up with. Confusion reigns on their product
line. Who would have thunk 650 is smaller than a 640?
It needs a one rotor.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.