Subject: The company that makes engine tube mounts from a solidworks file?
From: Rotary Engine
Date: 11/9/2010, 8:42 PM
To: AAA Put this in the To box


I was told that there is a Canadian company that will cut and profile
pipe
to your solidworks file so when you receive the pipe, it goes together
quite
nicely.
If anyone knows of the company, I would love to have the contact
information, thanks!
Bill Holland


I don't know about a Canadian company but there is one here
in California. It is called Industrial Metal Supply
in San Fernando. They have an automated machine that does it.
I am sure there are now a lot of those machines around.

http://www.industrialmetalsupply.com/Services/Laser-Metal-Cutting

------------------------------------------------------------
This is a great way to make motor mounts. If more people get
interested in one particular type of aircraft such as an RV6
I would consider making up a bunch of mm kits.
I have 3D dwgs on most kit airplane motor mounts already.
I will now do a 3d on any airplane design for no cost.

Paul Lamar

Hey Paul,

Do you have a design for the Zenith Zodiac CH650?  If not, what
information would I need to supply for you to do the design?

Mark LaPierre

Yes so happens I do. In fact the Rhino 3dm file is on the web site
for downloading.
http://www.rotaryeng.net/p-port-eg.zip

What CAD program do your have?.

This is for a light weight all aluminum high buck
rotary. The engine must be moved back for a cast iron
version. Let me know before you go with these dwgs
and I'll do another set.

Paul Lamar

There will be a compression load on the upper firewall in
that configuration, better make sure that it's diaphragm
worthy. Or run diagonals from the center upper support
to each of the upper motor mounts on the firewall
( maybe firewall stiffeners)  The bay behind the
firewall may also need diaphragm strengthening in
the horizontal plane, depending on the load, unless
the fuselage skins are monocoque in that region.
Unless I'm missing something.

Just some observations.

Chris Cosman


Good call Chris. You are chief structural engineer now that you
are a newly minted ME.

We went over that with C. Smith. Note the two diagonals down
to the base of the instrument panel. I also suggested
beefing the composite cowl that is riveted to this area.

Paul Lamar

Nice calcs Paul!  No promotion necessary.  Where was I when this all took place? Probably eyeballs deep in homework.

Keep in mind, I'm just cutting my engineering baby teeth.  Official ME-ness doesn't come for another 2 years.  Associates next spring.  I'm only 40 yrs old and I think I finally know what I want to be when I grow up.  Although the nuclear path is looking pretty tempting.

Chris Cosman



-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.