Paul,

Here are some pics of the exhaust augmenter  fabrication effort.  I also included the
intake plenum that takes up the right wing root area.  The red stuff is RTV
over exposed fiberglass found on the inside of firesleave  that I cut length
wise.  I used a wide strip riveted to the engine side and the diffuser side
of the augmenter so it could move.  Check me if I am wrong but the headers
are 36" and the intake runners are 22" for 65000 RPM?

Joe  Berki
Limo EZ

The length numbers are about right.

Paul Lamar