Subject: UPDATE ON TWIN GEAR BOX
From: Rotary Engine
Date: 11/14/2010, 3:20 PM
To: AAA Put this in the To box


HI PAUL
There is there up dated design gearbox for constant speed prop shaft ,

Jean Prudhomme

Jean,
I am curious about where the oil supply for the CS prop is getting into and
out of the PSRU. Is it feed off the engine oil? If so, is the PSRU lubed with
engine oil?

Dale Davies

Yes Paul [Dale?] from the engine oil system true prop governor and return to engine oil pan,the casting have already a port connection for the return line on the middle of larger bow part of casting it can be turned a different position on bottom of side depends on oil retention on gearbox.
The prop governor have to be driven by belt but the spline shaft have to be lubricated or if already one available for belt driven


Jean Prudhomme
                   

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.