Subject: UPDATE ON TWIN GEAR BOX
From: Rotary Engine
Date: 11/17/2010, 8:56 AM
To: AAA Put this in the To box


 HI PAUL
 There is there up dated design gearbox for constant speed prop shaft ,

 Jean Prudhomme

 Jean,
 I am curious about where the oil supply for the CS prop is getting into and
 out of the PSRU. Is it feed off the engine oil? If so, is the PSRU lubed with
 engine oil?

 Dale Davies

 Yes Paul [Dale?] from the engine oil system true prop governor and return to
 engine oil pan,the casting have already a port connection for the return line on
 the middle of larger bow part of casting it can be turned a different position
 on bottom of side depends on oil retention on gearbox.
 The prop governor have to be driven by belt but the spline shaft have to be
 lubricated or if already one available for belt driven


 Jean Prudhomme


 Paul
 I have to built passageway to each main shaft bearing and return to the main
 housing.
 Cutted Half small aluminum tubing heavy gauge will be welded outside of the 4"
 dia round part as oil lube feeding and the other as return.
 I am not at this stage but i do have an idea.
 I am well equipped with 250 amps tig welder



 Jean Prudhomme

     Good morning Paul
I did order a pce of 9"dia by 4" long alum bar,instead of making the rear pce with 3 pces of tubing and weld involved i found it will be cheaper and faster to machine from a block.
I found a company who sell by the inches and my pce cost $164.00 with shipping.
See attachment


https://www.speedymetals.com/c-8342-aluminum.aspx


Jean Prudhomme                   

Yes that does happen. Thick wall aluminum tubing is EXPENSIVE,
The trick is to find somebody with a really
big old powerful lathe and a bunch of 2 or 3 inch drills to drill it
out. I was lucky as there is somebody on the field here
in Santa Paula with a really BIG lathe.

The next problem is finding somebody with a powerful
tig machine to weld thick wall tubing.

Milo has a pattern in the foundry for these castings.
He plans to drop some of them off here Dec, 20th so
if you need a couple let me know and I will ship
them to you.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.