Paul,
I read about P Porting on the turborx.com site, and they say that
1. the engine won't idle much below 2000 rpm
2. shorter engine life
3. "needs an exhaust system designed to produce excessive noise"
As I recall, the 13B can produce about 180 HP at 6K [with PP?]
and perhaps 250 HP with turbo and PP at 6K rpm. I hope I am
remembering those correctly.
Anyway, if I wanted to retain better idle characteristics, and also
wanted a very QUIET exhaust system [like a car], what HP could
I achieve with just a "mild" or "street" [side] port and turbo?
Thanks again.
Gene Kahn
A p-port RX8 engine idles just as well as an old perip
exhaust port 13 B engine.
Forget all you know about auto engine RPM. A rotary is
just getting started at 6000 RPM.
They are wrong on both counts. The p-port engine will produce
300 HP at 9500 RPM. A turbo street car engine can and has been
built with as much as 450 HP.
How quiet it is for a street car depends only on the muffler.
It all depends on how much HP you want for your street car.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.