Paul,

 What affects occur when a Holley 2300 is used on a 2nd gen P Port?  I think
 you have stated that it works on a Renesis because of the side port exhaust
 on the website.

 Joe Berki
 Limo EZ

 Well you will be down on power a lot as it is only 350 CFM
 and not 500 CFM. It will work on a P-port 13B but the idle will be
 a bit worse than if it was mounted on an RX8 p-port
 engine.

 Paul Lamar


*There are both 350cfm and 500cfm models of the Holley 2300.  My lititation
now is getting a Tom McNealy leaning block as it seems he has not made any
for over a year.

Todd

They are not hard to make if you can find a machine
shop. They are just a simple barrel valve.

Also check out Adjust A Jet.

Paul Lamar