Subject: Single Rotor E-shaft details
From: Rotary Engine
Date: 11/22/2010, 11:47 PM
To: AAA Put this in the To box


 Paul
 Thank you for the photos of the single rotor e-shaft. Are there any
 dimensioned sketches available? I want to make a drawing for my
 machinist. I can back most of the details out of the twin e-shaft if I
 knew the width of the single eccentric.

 I found an interesting cooling detail using a expansion chamber for
 the coolant overflow.  Is this more complicated than it needs to be?
 Th elowest portion of the page below.

 http://www.canardaviation.com/cozy/chap23i.htm

 Matt Naiva

 Here is an Autocad dwg from George Grimes I think.
 What drawing program are you using?

 Paul Lamar

Paul
Thank you! I will likely use Pro-E although the machinist would likely
prefer a dxf file. I was reviewing the exploded drawings on the
following link. There appears to be some sort of a counter weight on
the flywheel end. Are there any special balancing requirements for the
single rotor?

http://www.rotorparts.co.za/Info.html

Matt Naiva


It is kind of tricky to design counter weights for a one rotor.
I think Pro -E will give you the centroid of a solid which
might help.

Here are the mathematical formulas for balancing.

Paul Lamar


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.