Subject: crazy question? 12 vs 24 v alt
From: Rotary Engine
Date: 11/22/2010, 8:38 AM
To: AAA Put this in the To box


Suppose one has a supposed 24v alt installed on a 12v system, with
an old
Ford type Cessna 12v regulator. The voltmeter in the plane (several of
them)
never indicates over 14 or so volts. Will a regulator limit the voltage
delivered to no more than 12-14v or ? What would supposedly happen if a
REAL
24v alt were installed-I'm thinking all sorts of mayhem-battery, bulbs,
kaput 12v radios, etc? We are talking 60A unit here. Inquiring minds
want
to
know....(I think I have a mislabeled OEM unit!)

Marc W


Marc,
one of the more popular small alternators (B&C-20)  for the continental
uses
the same alternator for both 14 and 28v and only the regulator is
changed.
Larry

Perfect example. That's a wound field alternator.

The regulator will just lower the field current until the output
voltage is
in the right range.

Matt
--

So what you all are saying is that it doesn't matter if a 24V or a 12V
alt
is installed as long as the regulator is a 12v regulator? Seems
counterintuitive.....why do they even sell 12v alternators now? Most
are 24V
oem now.
Marc



An alternator design is a compromise of several factors, among them are
rpm, weight, size, voltage output, current output, and heat dissipation.
Larger wire reduces resistance - less resistance means less heat.
More wraps of the wire around the core gives more voltage, but increases
space required and reduces heat dissipation.
There are also two sets of coils to consider - the out put coils
(stators) and the field coils (rotor). The stronger the magnetic field
produced by the rotor, the greater the energy induced into the stator.
A nominal 12 (or 14) volt system uses a lead-acid battery with a fully
charged capacity of 12.6 volts, and a required charging voltage of 13.75
volts. Some batteries (Optima, for instance), have slightly different
voltages and require special regulators to achieve best results.
Nominal 24 (or 28) volt systems are double, 25.2 and 27.5 volts
respectively.
For the same design RPM, a 60 amp alternator designed for 14 (12) volts
will be smaller and lighter than a 60 amp alternator designed for 28
volts, but the 14 volt unit produces only half the power.

Victor Roberts
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.