Subject: Single Rotor E-shaft details
From: Rotary Engine
Date: 11/23/2010, 8:57 PM
To: AAA Put this in the To box

 It is kind of tricky to design counter weights for a one
 rotor.
 I think Pro -E will give you the centroid of a solid
 which
 might help.

 Here are the mathematical formulas for balancing.

 Paul Lamar

 The formulas above work pretty well. I used those for
 calculating the
 correction on the front counter weight, and designing the
 fly wheel There
 was very little correction to be made on the dynamic
 balancer. I did that on
 two sets with the same results.

 Richard Sohn
 N2071U


 Paul,

This balance diagram is the uncorrected one with the rear mass mislabeled on
the one rotor portion.

Dan Stanzione

Here is the corrected version.

Paul Lamar

This is a great community, transparent sharing of talents and gifts is
refreshing.
Obviously each one of us are the "mechanic in charge"  but it really
helps to have the opportunity to learn from others triumph and
tribulations!  I just checked out a vintage RX-2 rebuild manual from
the library. Very detailed!

Richard
Is there significant weight advantage to starting a single from a 12a vs a 13b?
The E-shaft drawing is for a 12 is the 13 shaft the same?

Regards,

Matt Naiva


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.