Subject: Prop shaft metal selection Att. Jeff.
From: Rotary Engine
Date: 11/29/2010, 7:08 AM
To: AAA Put this in the To box


 Paul
 I can purchase round metal to machine my prop shaft and the material
 available by the inch is the 8620 cold roll steel.
 I will machine the shaft myself and have the splines made it by
 outside shop.
 I do have an alternative ,built the shaft with the planet driven by
 outher splines or built the shaft complete with the planet housing
 and it will be in one pce,the price for material difference is $50.00
 but more milling machining for the pinions cages.
 I wondering if Jeff can do the milling parts
 9" long 4.25"dia is $124.00
 8" 3.75"dia is $72.00
 I bought a 9"x 24 lathe from Harbor Freight and i should have it soon

 There is the 8620 specs;

 8620 Cold Roll Steel

 Analysis
 Mechanical Properties
 Applications
 Machineability and Weldability
 Heat Treating
 Tolerances
 Speedy Metals items
 AISI 8620 is an alloy carburizing steel when thermally treated
 develops a hard outer case with a soft ductile core. Carefully
 controlled proportions of chromium, nickel and molybdenum are
 responsible for the extensive use as a carburizing alloy steel,
 with valuable features including extreme surface hardenability
 and good internal strength. Has minimum distortion and growth
 characteristics. 8620 has good machinability and responds well to
 polishing.
 ANALYSIS

 Carbon (C)
 Manganese (Mn)
 Silicon (Si)
 Chromium (Cr)
 Nickel (Ni)
 Molybdenum (Mo)
 Phosphorus (P)
 Max
 Sulfur (S)
 Max

 18-0.23
 0.7-0.9
 0.15-0.35
 0.4-0.6
 0.4-0.7
 0.15-0.25
 0.035
 0.04
 8620 cold roll bars conforms to ASTM A331
 MECHANICAL PROPERTIES

 Condition
 Tensile Strength (PSI)
 Yield Strength (PSI)
 Reduction of Area
 Elongation in 2"
 Brinell Hardness

 Annealed
 100,000
 85,000
 60
 21
 185

 APPLICATIONS
 8620 applications include gears, pinions, cams, cranks,
 clutch shafts, shafting, axles, tie bars, collets, bushings,
 heavy duty pins, bolting, springs, hand tools, die cases,
 and a multitude of machinery parts and components.
 MACHINEABILITY AND WELDABILITY

 8620 has a machinability rating at 66% of B1112. Average cutting
 speed 127 ft/min.
 8620 can be forged at 2200° down to 1800° F prior to hardening or
 carburizing.
 8620 is excellent for welding applications

 HEAT TREATING
 8620 can be hardened to 1500° F followed by water quench. Carburize
 at 1650° - 1700° F in an appropriate carburizing medium and oil
 quench to harden. Tempering of carburized parts is done at 250° - 300° F
 and will result in the alloy having a core strength of approximately
 135,000 psi minimum. Tempering of heat treated and water quenched
 parts (not carburized) is done at 400° - 1300° F, with greater
 hardness the lower the tempering temperature.
 TOLERANCES

 Rounds

 Up to 1-1/2" incl.
 -.002

 Over 1-1/2 to under 2-1/2
 -.003

 Over 2-1/2 to 4" incl.
 -.004

 SPEEDY METALS ITEMS

 3/8" {A} Rd Cold Finished 8620
 1/2" {A} Rd Cold Finished 8620
 5/8" {A} Rd Cold Finished 8620

 11/16" {A} Rd Cold Finished 8620
 3/4" {A} Rd Cold Finished 8620
 7/8" {A} Rd Cold Finished 8620

 1" {A} Rd Cold Finished 8620
 1-1/8" {A} Rd Cold Finished 8620
 1-1/4" {A} Rd Cold Finished 8620

 1-3/8" {A} Rd Cold Finished 8620
 1-1/2" {A} Rd Cold Finished 8620
 1-5/8" {A} Rd Cold Finished 8620

 1-3/4" {A} Rd Cold Finished 8620
 1-7/8" {A} Rd Cold Finished 8620
 2" {A} Rd Cold Finished 8620

 2-1/8" {A} Rd Cold Finished 8620
 2-1/4" {A} Rd Cold Finished 8620
 2-3/8" {A} Rd Cold Finished 8620

 2-1/2" {A} Rd Cold Finished 8620
 2-5/8" {A} Rd Cold Finished 8620
 2-3/4" {A} Rd Cold Finished 8620

 2-7/8" {A} Rd Cold Finished 8620
 3" {A} Rd Cold Finished 8620
 3-1/4" {A} Rd Cold Finished 8620

 3-1/2" {A} Rd Cold Finished 8620
 3-3/4" {A} Rd Cold Finished 8620
 4" {A} Rd Cold Finished 8620

 4-1/4" {A} Rd Cold Finished 8620
 4-1/2" {A} Rd Cold Finished 8620
 4-3/4" {A} Rd Cold Finished 8620

 5" {A} Rd Cold Finished 8620
 5-1/2" {A} Rd Cold Finished 8620
 6" {A} Rd Cold Finished 8620


 Jean Prudhomme

 -----------------------------------------
 Jeff is on here so I think he will answer.

 Paul Lamar


 Jean,

 Good information. Thanks, I was considering chrome moly 4130 for
 the same application but was not happy about the way it machines.
 I am interested in purchasing a chunk of 6 inch round by about 8
 inches long. My thinking, is to have the six inch prop flange on the
 outer size machined down to the outer seal step, and then reduced down
 the 3 inch dia. bearing step and finally machine the inner spline. On
 the Bell PSRU the forged planet gear housing has a female spline plate
 that is bolted to it. Like Mistral's design I will have the Prop
 shaft necked down after the spline and threaded to accommodate a 52mm
 Hex nut. This nut locks the unit together The most inner partt of the
 shaft reduces down to about 20mm and rides in the inner bearing. The
 inside of the bar will be bored out to lighten it up. For maximum
 toughness I would prefer starting with a forged bar though. If you or
 anyone else is thinking the same way I would be willing to go in on a
 group buy of material. Any info on a forged piece?

 Doug in Japan


 Doug

 Just read your request....sounds interesting..I can help if you want,
 let me know.............

 BTW 4130 is not difficult to machine annealed, choose the best material
 for the application.......

 jeff

 Jeff is right, you may wish to use annealed 4140 tubing, HT to Rc 60 or so.
 milo

 Jeff,

 Thanks for correcting me. Are you set up to cut splines? I can't use tubing
 Milo since the part is too complicated. This is a very important part and I am
 loathe to weld something together. Hence, lots of shavings and lots of
 machining time..

 Doug in Japan

                        

Jeff what do you think about the 8620 specs and also the idea to machine the planet housing with shaft in one pce??

If you look on the planet those 8 rectangular cages for the pinions doyou think it can be easy to machine plus the locking pin location with your equipment .

How much it can cost to machine the shaft.

I am sending you the assembly sketch for your infos the shaft details is on drawing board


Jean Prudhomme

I took the liberty of adding color Jean.
You really need a 3D.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.