Subject: Prop shaft metal selection Att. Jeff.
From: Rotary Engine
Date: 11/30/2010, 10:24 AM
To: AAA Put this in the To box



 Paul
 I can purchase round metal to machine my prop shaft and the material
 available by the inch is the 8620 cold roll steel.
 I will machine the shaft myself and have the splines made it by
 outside shop.
 I do have an alternative ,built the shaft with the planet driven by
 outher splines or built the shaft complete with the planet housing
 and it will be in one pce,the price for material difference is $50.00
 but more milling machining for the pinions cages.
 I wondering if Jeff can do the milling parts
 9" long 4.25"dia is $124.00
 8" 3.75"dia is $72.00
 I bought a 9"x 24 lathe from Harbor Freight and i should have it soon

 There is the 8620 specs;

 8620 Cold Roll Steel

 Analysis
 Mechanical Properties
 Applications
 Machineability and Weldability
 Heat Treating
 Tolerances
 Speedy Metals items
 AISI 8620 is an alloy carburizing steel when thermally treated
 develops a hard outer case with a soft ductile core. Carefully
 controlled proportions of chromium, nickel and molybdenum are
 responsible for the extensive use as a carburizing alloy steel,
 with valuable features including extreme surface hardenability
 and good internal strength. Has minimum distortion and growth
 characteristics. 8620 has good machinability and responds well to
 polishing.
 ANALYSIS

 Carbon (C)
 Manganese (Mn)
 Silicon (Si)
 Chromium (Cr)
 Nickel (Ni)
 Molybdenum (Mo)
 Phosphorus (P)
 Max
 Sulfur (S)
 Max

 18-0.23
 0.7-0.9
 0.15-0.35
 0.4-0.6
 0.4-0.7
 0.15-0.25
 0.035
 0.04
 8620 cold roll bars conforms to ASTM A331
 MECHANICAL PROPERTIES

 Condition
 Tensile Strength (PSI)
 Yield Strength (PSI)
 Reduction of Area
 Elongation in 2"
 Brinell Hardness

 Annealed
 100,000
 85,000
 60
 21
 185

 APPLICATIONS
 8620 applications include gears, pinions, cams, cranks,
 clutch shafts, shafting, axles, tie bars, collets, bushings,
 heavy duty pins, bolting, springs, hand tools, die cases,
 and a multitude of machinery parts and components.
 MACHINEABILITY AND WELDABILITY

 8620 has a machinability rating at 66% of B1112. Average cutting
 speed 127 ft/min.
 8620 can be forged at 2200° down to 1800° F prior to hardening or
 carburizing.
 8620 is excellent for welding applications

 HEAT TREATING
 8620 can be hardened to 1500° F followed by water quench. Carburize
 at 1650° - 1700° F in an appropriate carburizing medium and oil
 quench to harden. Tempering of carburized parts is done at 250° - 300° F
 and will result in the alloy having a core strength of approximately
 135,000 psi minimum. Tempering of heat treated and water quenched
 parts (not carburized) is done at 400° - 1300° F, with greater
 hardness the lower the tempering temperature.
 TOLERANCES

 Rounds

 Up to 1-1/2" incl.
 -.002

 Over 1-1/2 to under 2-1/2
 -.003

 Over 2-1/2 to 4" incl.
 -.004

 SPEEDY METALS ITEMS

 3/8" {A} Rd Cold Finished 8620
 1/2" {A} Rd Cold Finished 8620
 5/8" {A} Rd Cold Finished 8620

 11/16" {A} Rd Cold Finished 8620
 3/4" {A} Rd Cold Finished 8620
 7/8" {A} Rd Cold Finished 8620

 1" {A} Rd Cold Finished 8620
 1-1/8" {A} Rd Cold Finished 8620
 1-1/4" {A} Rd Cold Finished 8620

 1-3/8" {A} Rd Cold Finished 8620
 1-1/2" {A} Rd Cold Finished 8620
 1-5/8" {A} Rd Cold Finished 8620

 1-3/4" {A} Rd Cold Finished 8620
 1-7/8" {A} Rd Cold Finished 8620
 2" {A} Rd Cold Finished 8620

 2-1/8" {A} Rd Cold Finished 8620
 2-1/4" {A} Rd Cold Finished 8620
 2-3/8" {A} Rd Cold Finished 8620

 2-1/2" {A} Rd Cold Finished 8620
 2-5/8" {A} Rd Cold Finished 8620
 2-3/4" {A} Rd Cold Finished 8620

 2-7/8" {A} Rd Cold Finished 8620
 3" {A} Rd Cold Finished 8620
 3-1/4" {A} Rd Cold Finished 8620

 3-1/2" {A} Rd Cold Finished 8620
 3-3/4" {A} Rd Cold Finished 8620
 4" {A} Rd Cold Finished 8620

 4-1/4" {A} Rd Cold Finished 8620
 4-1/2" {A} Rd Cold Finished 8620
 4-3/4" {A} Rd Cold Finished 8620

 5" {A} Rd Cold Finished 8620
 5-1/2" {A} Rd Cold Finished 8620
 6" {A} Rd Cold Finished 8620


 Jean Prudhomme

 -----------------------------------------
 Jeff is on here so I think he will answer.

 Paul Lamar


 Jean,

 Good information. Thanks, I was considering chrome moly 4130 for
 the same application but was not happy about the way it machines.
 I am interested in purchasing a chunk of 6 inch round by about 8
 inches long. My thinking, is to have the six inch prop flange on the
 outer size machined down to the outer seal step, and then reduced down
 the 3 inch dia. bearing step and finally machine the inner spline. On
 the Bell PSRU the forged planet gear housing has a female spline plate
 that is bolted to it. Like Mistral's design I will have the Prop
 shaft necked down after the spline and threaded to accommodate a 52mm
 Hex nut. This nut locks the unit together The most inner partt of the
 shaft reduces down to about 20mm and rides in the inner bearing. The
 inside of the bar will be bored out to lighten it up. For maximum
 toughness I would prefer starting with a forged bar though. If you or
 anyone else is thinking the same way I would be willing to go in on a
 group buy of material. Any info on a forged piece?

 Doug in Japan


 Doug

 Just read your request....sounds interesting..I can help if you want,
 let me know.............

 BTW 4130 is not difficult to machine annealed, choose the best material
 for the application.......

 jeff

 Jeff is right, you may wish to use annealed 4140 tubing, HT to Rc 60 or
so.
 milo

 Jean,


 Please tell me how you would attach the prop flange. Taper or key way?
Both? I
 assume the inner piece is threaded.

 Doug in Japan

               Doug
The flange have big splines and will be hold by threaded nuts with large
flange and tighted with hight torque by bolting the flange on long pce of
flat metal to hold it at torquing time..
At the end of splines on prop flange i design a taper who will meet the one
one prop shaft.
An o ring will be located between the propshaft and the flange nut.

For bearing lubrication i will machine a passageway on the housing for
feeding and oil return under the mid sleeve bushing and the mid sleeve
bearing will be pressure fit before final i.d. size machining
I know my housing will not fit Jeff plate holes but it will be much
stronger the fact a constant speed will be driven and the front housing is
available true Speedway engineering.

The aluminum housing will be close to tracy weight might be a  1 or 2lbs at
the most but i try to get lighter as possible.
With the 2 parts housing it will be much more accurate  to lock the ring
gear before final assembly.

I had a bearing on the sungear shaft at the seal location but it can be
built without it but i prefer adding a roller or ball bearing at this
position.
I did several assembly design to obtain the best configuration and i am at
the stage to details all parts.
I do have an estimate for all bearings and it is close to $400 and i still
searching for better price.


Jean Prudhomme



To reduce shaft weight and minimize cost would it be practical to shrink fit
an interior sleeve in the prop shaft end(s) (all parts annealed) and then
bore and thread near the parting line? Will the bolt threads change too much
after HT and grinding for bearing ID? Or,  is it more practical to bore
thicker wall to the ID shape?

Dan F




-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.