Subject: Will I be able to install A rotary
From: Rotary Engine
Date: 12/1/2010, 7:14 AM
To: AAA Put this in the To box



 Hi Everyone,

 Firstly thank you for letting me into your world.

 My name is Keith (41) and I live In South Australia.
 I was wondering if anyone could help me..

 I'm just going through flying school and have appox 22 hours ... I am
 looking at
 building a kit plane. The plane I'm looking at is a Morgans Aeroworks
 Sierra
 100. As the build seems very simply...   and at AU$24,500 for the basic
 Kit
 seems reasonably priced.
 http://www.morganaeroworks.com.au/sierra100.html

 With a Jabiru 6 cylinder engine 120HP, empty weight is about 313kg (690
 lbs)
 With a  M TOW of 544kg (1200lbs) for LSA class.

 Details of Jabiru 3300  engine 83.5 kg (178 lbs) complete including
 exhaust,carburetor, starter motor, alternator and ignition system....
 http://www.jabiru.net.au/

 Is it possible to install a rotary to meet this criteria? (Possible a
 single
 rotor version.....)


 Any Ideas or help or comments would be appreciated.

 Keith

 As I recall the Jabiru 6 cylinder engine 120HP is rated at 3300 RPM
 which is not the same thrust as an AC engine rated at 2700 RPM.
 Prop efficient is down at 3300 RPM. Now a one rotor 120 HP Mazda would
 be geared to run the prop at 2700 RPM. However 178 pounds all up for
 the engine alone is hard to beat. You would need aluminum end housings
 to get in that ball park with a Mazda. If you can wait awhile the
 AIXRO Wankel kart engine manufacturer is coming out with a two
 rotor version at around 100 HP that should be near ideal for that
 category of light sport air craft.

 Since the time to build is not much longer
 for something bigger, faster  and more powerful I would go bigger.
 Then you can use a much cheaper and more powerful Mazda 2 rotor.

 I suspect there would be little difference in the kit price.
 In that case you would get a faster airplane which is very
 important if we are talking cross country. Australia is a large
 country. You need a faster airplane. I know because I have flown
 all over the interior.

 Paul Lamar


Paul I recognize some of those locations but the stuff next to water has me
stumped.
I would love to know the locations if near an airfield for future trips.
Cheers.
Nige.

That is Brampton Island in the Coral Sea.
Here are a couple of screen shots. A long way from Adelaide :)

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.