Hi Everyone,
Firstly thank you for letting me into your world.
My name is Keith (41) and I live In South Australia.
I was wondering if anyone could help me..
I'm just going through flying school and have appox 22 hours ... I am
looking at
building a kit plane. The plane I'm looking at is a Morgans Aeroworks
Sierra
100. As the build seems very simply... and at AU$24,500 for the basic
Kit
seems reasonably priced.
http://www.morganaeroworks.com.au/sierra100.html
With a Jabiru 6 cylinder engine 120HP, empty weight is about 313kg (690
lbs)
With a M TOW of 544kg (1200lbs) for LSA class.
Details of Jabiru 3300 engine 83.5 kg (178 lbs) complete including
exhaust,carburetor, starter motor, alternator and ignition system....
http://www.jabiru.net.au/
Is it possible to install a rotary to meet this criteria? (Possible a
single
rotor version.....)
Any Ideas or help or comments would be appreciated.
Keith
As I recall the Jabiru 6 cylinder engine 120HP is rated at 3300 RPM
which is not the same thrust as an AC engine rated at 2700 RPM.
Prop efficient is down at 3300 RPM. Now a one rotor 120 HP Mazda would
be geared to run the prop at 2700 RPM. However 178 pounds all up for
the engine alone is hard to beat. You would need aluminum end housings
to get in that ball park with a Mazda. If you can wait awhile the
AIXRO Wankel kart engine manufacturer is coming out with a two
rotor version at around 100 HP that should be near ideal for that
category of light sport air craft.
Since the time to build is not much longer
for something bigger, faster and more powerful I would go bigger.
Then you can use a much cheaper and more powerful Mazda 2 rotor.
I suspect there would be little difference in the kit price.
In that case you would get a faster airplane which is very
important if we are talking cross country. Australia is a large
country. You need a faster airplane. I know because I have flown
all over the interior.
Paul Lamar
Paul I recognize some of those locations but the stuff next to water has me
stumped.
I would love to know the locations if near an airfield for future trips.
Cheers.
Nige.
That is Brampton Island in the Coral Sea.
Here are a couple of screen shots. A long way from Adelaide :)
Paul Lamar
Paul,
Thanks for your feed back, much appreciated.
When you referred to a larger plane where you referring
to the 4 seat version of the morgan aeroworks kit?
If not a few examples would give me something to look into..
Keith (SA)
Yes! Just something larger than a LSA designed for a Lycoming or
Continental 150 HP or up engine. The power and speed limitations
of a LSA just make it an expensive toy. When you get a 30 kt head wind
or need to climb over a 4000 meter mountain you will appreciate
what I am saying :) IMHO 150 MPH cruise is marginal in my book.
200 MPH or up is much better for cross country.
Of course 80 MPH freeways are few and far between in Oz so
the outback roads or lack thereof make the slower airplanes
more viable by comparison to vehicle travel times.
Some say yes but they burn too much gas. The answer
one should be really looking for is MPG. And a fast
slick airplane is not all bad.
That Morgan Aeroworks 4 place looks like a good one.
http://www.morganaeroworks.com.au/
Australia really needs Mazda wankel powered airplanes :)
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.