Subject: Will I be able to install A rotary
From: Rotary Engine
Date: 12/6/2010, 3:00 PM
To: AAA Put this in the To box

  Hi Everyone,

  Firstly thank you for letting me into your world.

  My name is Keith (41) and I live In South Australia.
  I was wondering if anyone could help me..

  I'm just going through flying school and have appox 22 hours ... I am
  looking at
  building a kit plane. The plane I'm looking at is a Morgans Aeroworks
  Sierra
  100. As the build seems very simply...   and at AU$24,500 for the basic
  Kit
  seems reasonably priced.
  http://www.morganaeroworks.com.au/sierra100.html

  With a Jabiru 6 cylinder engine 120HP, empty weight is about 313kg (690
  lbs)
  With a  M TOW of 544kg (1200lbs) for LSA class.

  Details of Jabiru 3300  engine 83.5 kg (178 lbs) complete including
  exhaust,carburetor, starter motor, alternator and ignition system....
  http://www.jabiru.net.au/

  Is it possible to install a rotary to meet this criteria? (Possible a
  single
  rotor version.....)


  Any Ideas or help or comments would be appreciated.

  Keith

  As I recall the Jabiru 6 cylinder engine 120HP is rated at 3300 RPM
  which is not the same thrust as an AC engine rated at 2700 RPM.
  Prop efficient is down at 3300 RPM. Now a one rotor 120 HP Mazda would
  be geared to run the prop at 2700 RPM. However 178 pounds all up for
  the engine alone is hard to beat. You would need aluminum end housings
  to get in that ball park with a Mazda. If you can wait awhile the
  AIXRO Wankel kart engine manufacturer is coming out with a two
  rotor version at around 100 HP that should be near ideal for that
  category of light sport air craft.

  Since the time to build is not much longer
  for something bigger, faster  and more powerful I would go bigger.
  Then you can use a much cheaper and more powerful Mazda 2 rotor.

  I suspect there would be little difference in the kit price.
  In that case you would get a faster airplane which is very
  important if we are talking cross country. Australia is a large
  country. You need a faster airplane. I know because I have flown
  all over the interior.

  Paul Lamar


Paul I recognize some of those locations but the stuff next to water has me
stumped.
I would love to know the locations if near an airfield for future trips.
Cheers.
Nige.

That is Brampton Island in the Coral Sea.
Here are a couple of screen shots. A long way from Adelaide :)

Paul Lamar

Hi Keith,

                If you want to live to a ripe old age, NEVER put a Jabiru
motor into your air craft. They are crap, they have had many issues in the
past and they don't seem to have addressed them at all.

   A flying school here in NZ bought two Jabiru's, both have had engine
failure, resulting in one of them being written off, the pilot was very
lucky to only sustain minor injuries.

Chris in NZ.

What kind of failures Chris?

Paul Lamar

Hi Chris in NZ

I have to Agree with you, that's why I looking @ a rotary.

I have only 22 hours of flying time and I have had 2 engine failures in
a jabiru
2200 (different planes)

The first was a broken through bolt..
Plane started to vibrate badly, first thought it was a prop, had to
declare Pan
pan and limp back to the strip @ just above idle....
Broken bolt and cracked cylinder..was the problem ( Running on 3
cylinders Plus
the leaking oil went all over distributors cause engine to miss as well...)

The Second was on startup, Dropped a valve..or a valve seat came loose. I
think....

regards Keith


Hi Paul,

   Sorry it’s taken a while to get back, been getting the gen.
On one of the aircraft the timing belt pulley fell off (sheared the
bolts holding it on to the crank)

The other was piston failure (collapsed skirt)

Two very good reasons to do away with pistons altogether.

Chris in NZ


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.