Subject: Building a 2 rotor slide throttle version of the Ellison.
From: Rotary Engine
Date: 12/8/2010, 11:14 AM
To: AAA Put this in the To box

I would use Holley parts where ever possible
when building the fuel pressure diaphragm regulator.
Namely the diaphragm and the float needle and seat.
No point in reinventing the wheel.

I'll work on integrating the pressure regulator
in the 3D dwgs. A center mount should be just about right.


Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.