Subject: better photo of the helicopter
From: Rotary Engine
Date: 12/9/2010, 8:20 AM
To: AAA Put this in the To box


 Paul,
 Here is a better photo of the helicopter with the Mazda engine.
 John McEverett

 I too have that picture.

 I looked up the messages on it and apparently it is not far
 from where I live as I went to his hangar to see it.
 I got his name and phone number from ebay but did not record.

 Unfortunately I don't have his name yet. I did assess
 the cooling system as inadequate but easy to fix.

 Here is my assessment at the time.
 ===================================================================
  Here are a few pictures. The plumbing needs to be changed for the  water
 cooling.  So too the fuel supply plumbing needs to be switched over to AN.
 You don't want to stake your life on 35 cent hose clamps.  The big question
 is the FAA going to take kindly to a certified aircraft with a rotary
 engine?  I think they frown on this or aircraft everybody would be doing it
 to bypass the annual inspection requirements.  Check with your local FSDO
 The engine is stock everything so it started life with 160 HP or so.  A
 large fan has been mounted on the water pump shaft and my guess it is
 sucking down 20 to 30 HP at 6000 to 7000 RPM.  Net HP out of the engine,
 depending on the exact reduction ratio, is about 130 to 140.  Too little for
 this large helicopter.  The answer is to p-port the stock engine and or
 trash the fan and move the rad and oil cooler from in front of the engine up
 underneath the rotor blades horizontally oriented for max air flow.
 ============================================================================


 Paul Lamar


 Paul,

 A turbocharged 13Bwith aluminum plates would be perfect on this helicoter.
 He has a primary reduction on it so the v-belt drive has the correct input
 rpm.  I would do this in a heartbeat if this wasn't a certified machine.

 Steve Brazil

I found this link which I suspect is the same as the eBay listing.  Seller
includes a hunk of an online article David Leonard wrote on "why a rotary" and
includes david's signature line which may explain some of the confusion.  I've
written to inquire further and will update if/when I get a reply.

William Hagood

Dave Leonard is on here but your link did not come across.

Paul Lamat


It probably helps if one actually pastes it in:(  Sorry.

http://tinyurl.com/24aknsk

William Hagood

Its backkkkk!!!!

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.