http://tinyurl.com/28gc2bo
http://www.tillotson.ie/

This is going to save a pile of money
making a dual Ellison for our P-ports.

Some of the Ellison parts are bought
from Tillotson. Brilliant idea on the
part of Ellison. Cuts his cost enormously.
Rotec is probabbly doing the same thing.

I was going to use Holley parts but
this is 1000% better.

Paul Lamar

-----------------------------------------------------

Here is the latest 3D's.

The stock ACRE slide throttle parts are used.
The slide itself is modified for the brass tube
with all tiny holes in it.

The pressure regulator is a copy of the Ellison which
uses stock Tillotson pressure regulator parts. Same
as Ellison did.

The pressure regulator is designed to bolt to the
stock slide housing using the existing bolt holes.

The fuel is fed into the center of the brass tube
and then out to each runner.

Craig, did you get a quote on the laser holes?

Paul Lamar


No joy there Paul. My friend says he doesn't have the software for doing any
cutting, just the etching.
Another reason the laser work is EXPENSIVE, the vendors seem to squeeze every
last nickel out of their clients, much like microsoft.
C. Smith

OK I double check with a vender here.
The cost is what killed it the last time.

Paul Lamar