I figured out a way to get the regulator back into the center
of the slide throttle. It involves milling a slot in the outer cover.
Another anticipated problem is drilling a real long straight hole
in the slide. Usually that is done with a special (expensive) device called
a gun drill. That can be solved by making the slide in two
pieces and linking them together when assembled. Each piece has
the tube hole drilled separately.
I also think I can get some more weight out of the regulator
block. It will have to be completely redrawn but I will wait
for that until I get a set of Tillotson parts.
Paul Lamar
Paul,
Are you saying we need only buy a $6 diaphragm kit and machine up the rest?
I think this would work great on a single rotor. Can you run a turbo
with an ellison style TB?
http://www.amazon.com/WINDEROSA-KIT-TILLOTSON-DIAPH-GSKT-451402/dp/B00230M29W
Operationally if I needed 50hp for cruise what would a single need to
turn? Would the rotary suffer producing such little power? i.e. would
it be in a RPM range it does not like?
Matt Naiva
I don't know about six dollars as you will need at least
three Tillotson parts. The diaphragm, the spring, the lever
and the needle valve. The spring is critical as that controls
the max pressure the regulator will tolerate. My guess is
5 psi. I intend to test the Ellison shortly to determine
that number.
Getting a slide throttle kit would also help.
Paul Lamar.
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.