That aspect of it needs testing. The needle valve holding
the pump pressure may need to be enlarged. I'll know more
when I get the Tillotson needle valve and compare it with
the Ellison.
Located repair kit.
Regulator "float" valve housing for Tillotson HR measures .0856" I.D. at
orifice. Body O.D. .260" so room available to enlarge orifice and bore
housing for larger valve.
Al Koivisto
Thanks Al. Looks like we will not have to drill it out much.
.097 looks about right for a 250 HP P-port.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.