Subject: Ellison type carb holes in the tube
From: Rotary Engine
Date: 12/18/2010, 3:00 PM
To: AAA Put this in the To box

snips.....

Can EDM be used to drill the .012" dia holes in the Ellison tubes?

Joe Berki
Limo EZ

Not to worry about the inch :)

EDM is a great idea. I'll have to talk to my local EDM guy.

Paul Lamar

Could concentric tubes be used to make the small fuel delivery holes?

The idea is that you would drill a pattern of holes using a more practical drill size. Make the holes while one tube is inserted inside the other.  Then slide (index) the tubes so that the effective hole size is made suitably smaller. This is like a tiny slide throttle for the fuel.

You might even be able to devise a mechanism to adjust the effective orifice size while in flight - a different type of mixture control.

Downside is that you might have to use a somewhat larger diameter large tube in order to flow enough fuel.


Matt-

That is a nifty invention Matt.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.