Paul,

I started laying out the intake runners.  The plan was to collect air from a
armpit scoop and  expand it with a glass plenum.  A metal plenum would house
the open ends of the runners and the injector mounting blocks.
Unfortunately the tubes pictured here are only about an inch shy of a 22"
runner length.  I am going to have to get creative to house the rear rotor
runner injector block inside of the metal plenum.  There is an air cleaner
between the glass plenum and the metal enclosure.

Can EDM be used to drill the .012" dia holes in the Ellison tubes?

Joe Berki
Limo EZ

Not to worry about the inch :)

EDM is a great idea. I'll have to talk to my local EDM guy.

Paul Lamar