Hi Ed,
My thoughts on making the rotor housing steel liner for a 13A/16X size radius
would be to try to get a 13A engine. Doug, would you have any leads on one in
Japan? With that we would have the shape of the inside. Casting a steel shape
that is the inside dimension would help form the proper shape. We would need a
die for the outside so it forms correctly. Figuring the inside circumference
would enable machining a 4130 pipe ID to that dimension. Then machine the
grooves in the OD with a tapered burr so the cast Al forms into it and can not
come "unglued" or separated. Then forming it with the dies to the shape. The
Al could then be cast around it and the width machined. The area for the Pport
could be left without cooling to eliminate sealing there, and the port almost
ready to go.
Anybody alse have an idea on this. Paul, what is the thickness of the Mazda
steel liner?
Dale Davies
It is very thin. On the order of .065. Here is how Mazda does it.
You would be reinventing the wheel :)
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.