Paul,

 Do you happen to have drawings that  we can download of the 13b
 (late model) that show all the major dimensions and the hole
 locations.  It would really speed up our process to get ours
 mounted.  We are designing our motor mount based on all the great
 info on your site.  I would love it if when we are done you would
 give it a look-see to see what you think, if it's not too much to ask.

 thanks

 Lionel

 P.S.  We are working in solid works because it's what we have
                        
 Here are the zip files.

 Paul Lamar


Do you have these same drawings in a file type
I can open with my Mac?  Thanks.

Gene Kahn

I think you are talking about the .STP or perhaps the .IGES files.
First you need some sort of 3D program.

IMHO Rhino is the best bang for the buck but I don't think
it runs on the Mac. Solid Works is good but very expensive
and I don't think that runs on the Mac either.

Autodesk but it is expensive at $4000.
http://www.pure-mac.com/cad.html
http://usa.autodesk.com/adsk/servlet/pc/index?id=14437167&siteID=123112

It might be cheaper to buy a $250 computer from Fry's and
get free Linux and then run one of six Linux programs.

http://www.linuxlinks.com/article/20090607033315929/CAD.html

See the attached png for the list. I have QCad and it works
well. Not as well as Rhino but pretty good.

Paul Lamar