Subject: Better and cheaper trigger for the 555 EFI
From: Rotary Engine
Date: 1/2/2011, 8:51 PM
To: AAA Put this in the To box


Roger,

This is cheaper than the ABS sensor and works
better. Klause has been using these for years.

I cut the trigger wheel with a large hole saw :)

Paul Lamar

Ok good that means it's a proven thing, I'll have a look at this , and
probably go with this venue, I like that these triggers are small and
everything can be miniaturized very much, and if I want to do a
sequential, I need four of those buggers, compactness will be an issue ,
will see where I will mount it, probably somewhere in one of the magneto
gears, they have the right speed, but will see.

I will probably mount the whole system on a board, and have it running
on my work bench first.

Well....first I need to find my workbench underneath all the stuff, but
that's ok, I have a shovel here somewhere...if I only could find that
one....

Seems to be that the FET drives are more expensive than the other
components,  10 or 12 bucks a pop...wow...have been sitting and
dismembering a lot of circuit boards for components, but not much that
matches the 555 system got out of it, maybe some high grade resistors
that 's all, but ...hey I need the therapy.

Really good , appreciate the info,

Roger



-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.