Subject: Better and cheaper trigger for the 555 EFI
From: Rotary Engine
Date: 1/3/2011, 7:04 PM
To: AAA Put this in the To box


Roger,

This is cheaper than the ABS sensor and works
better. Klause has been using these for years.

I cut the trigger wheel with a large hole saw :)

Paul Lamar

Ok good that means it's a proven thing, I'll have a look at this ,
and probably go with this venue, I like that these triggers are
small and everything can be miniaturized very much, and if I want to
do a sequential, I need four of those buggers, compactness will be
an issue , will see where I will mount it, probably somewhere in one
of the magneto gears, they have the right speed, but will see.

I will probably mount the whole system on a board, and have it
running on my work bench first.

Well....first I need to find my workbench underneath all the stuff, but
that's ok, I have a shovel here somewhere...if I only could find that
one....

Seems to be that the FET drives are more expensive than the other
components,  10 or 12 bucks a pop...wow...have been sitting and
dismembering a lot of circuit boards for components, but not much
that matches the 555 system got out of it, maybe some high grade resistors
that 's all, but ...hey I need the therapy.

Really good , appreciate the info,

Roger


Hi Roger,

If you do sequential injection you will need four somehow by the camshaft with
one magnet or indexed like from a distributor. Then if you use the Ford EDIS 4
cylinder coil, you need two more on the crankshaft.

The ones on the camshaft would open the appropriate injector and the
pulse width will determine the closing.

The ones on the crank will be 180 degrees apart. One to fire one coil on one
pair of running mates and the other for the other two cylinders.

Dale Davies


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.