Snips....
This would be a biz opportunity for a computer programmer
and designer to get wealthy. Build a device that mounts
on the dash board that monitors the OBD II connector
and reads out the fault codes in plain English in real time.
I can see lots of other uses like monitoring the mixture
ratio in real time to get the best MPG.
It is also an opportunity for car manufacturers to offer
this feature as an option. Got a suggestion box C Smith?
Paul Lamar
I have already put in such a suggestion in our "innovation bulletin
board".
Depending on the trim level of the vehicle, things are getting better.
On my
2010 focus there is what's called the message center and it puts a lot
of things
into plain english, there are 2 text displays, one right next to the
speedo, and
another in the center of the dash. About the only thing I use is the
real time
MPG readout, but i have only the basic trim level. The my ford touch
system is
supposed to be a leap ahead of that, but i don't have personal
experience with
it. One problem is the relationship the manufacturers have with their
service
networks. If too much information gets out, there may be some
resistance from
the dealers service departments. I dunno, a lot of industrial politics
involved
in the car business.
There are some new OBD readers out there, some even have a blue tooth
interface.
They are pretty cheap on eBay, but I don't know how sophisticated the
software
is.
C. Smith
I have a CarChip. It is not bad but I have some older OBD II software
that runs on notebook computers that is a lot better.
Paul Lamar
The Scangauge may be what you are looking for.
www.scangauge.com/
-lt
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.