Took about 2-3 hours per housing. Dremel tool, abrasive disk, sanding drum,
coarse and fine cratex wheels. Checked for interference with starret machinists
scale.
C. Smith
A Dremel tool is a bit under powered :)
Paul Lamar
Hmmm. Not sure what you mean by that. I'll say this, the dremel never got away
from me and nicked the liner anywhere I didn't want it to. Die grinders, and
other high speed pneumatic rotary tools do that to me all the time. 8-O
C. Smith
I have watched a pro do it. John at Mazdatrix. In his 40 years working with
rotaries he has probbly ported a thousand end housings :) He makes a wood clamp
to securely hold the rotor housing and then uses two hands on the die grinder.
Takes him 15 minutes :) The other secret is you use grinding stones and those
sandpaper wrapped sanding drums. Less "catching" than a bur.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.