There was a post by (George?) or someone else, intimating that they were going
to make some light weight center and end housings for much less than half the
cost of Racing Beat product. These would be P-Port only.
I have a serious interest for these, and as we are pretty much all building
P-Ports, there should be a significant and immediate demand. Probably more so
than a light weight rotor, as there are fewer technical issues to prove out.
If there is a real effort to move forward with these, I would like to throw
support that effort in any way I can.
C. Smith
I agree. That is a very worth while thing to do.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.