Subject: Improved Renesis Water Pump
From: Rotary Engine
Date: 1/11/2011, 5:24 PM
To: AAA Put this in the To box


 Paul,

 With an eye toward improving the cooling on my p-port 20B, I ordered one
 of these custom water pumps from Mazmart yesterday. They claim it will
 not cavitate up to 10,000 rpm. So, it should be well within the
 operating limits at 6000 - 7000 rpm. This looks even nicer than the 20B
 impeller.

 Mark

 P.S. They will give a discount for group buys of 10 or more.


 ------------------------------------------------------------
 Great news Mark. I assume this is the RX8 version. Do they have
 a 13B version. http://www.mazmart.com/

 Do you have the exact link? Is it a new RX8 part or a used
 RX8 part. I can't find it on the site?

 When the continuous power goes up the heating requirements
 on the rotor housings also go up. It is a good idea to install
 a rotor housing thermocouple. Similar to a cylinder head
 temperature gage. You want to keep the temperature of the aluminum
 under 500 F.

 The old 13B water pump had a better rotor than the
 new RX8 water pump.

 Is your engine back together? Let us know
 what the rotor housing thermocouple says.

 Paul Lamar

 P.S.

 I forgot to mention Mark is running an RX8 water pump on a
 3 rotor p-port so the cooling requirements are 150%
 of that of an RX8.

 Paul Lamar

 Hi Paul,

 I am wanting to buy an improved water pump impellor

 For my project. Did anybody get it together to purchase 10

 Impellors for a better price ? Alternatively do nine others

 Want to get together and buy 10 ?

 Chris in NZ

Must be this on <http://www.mozilla.com/en-US/firefox/central/e;

http://www.mazmart.com/ItemDetail.aspx?id=265
David Nimer


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.