I'm building a 2 rotor, P-Port, I have the standard RX-7 water pump,
do not need
dyana-focal, have the Doddridge plate mount.
C. Smith
C Smith, If useing a stock pump I measured from a 2005 RX8 which I
have 3 of. I also have an RX7 front housing Bruce Turrentine gave me
and it looks like using an RX7 front cover and water pump would also be
usable. The RX8 has as I remember two additional attachment bolts. I
think I will just send a copy of all the parts in .3Dm rhino format. The
file names with front in them are the accessory end housing, Files with
rear as part of the name are the bellhousing end. There are files with
intermediate or center in the name which are both center housings. There
are several drawings with all the housings shown on the same sheat. One
with the surfaces filleted and one without fillets.
All the "rear"
housings have a 3" extended flange to mount one of Jeffs motor plates
without spacers or Tracys mount. There are several bolt locationa added
not in the car bolt pattern. All hole locations are on the "bolt
locations" drawing. If you don't want the extended flange use the slice
or wirecut command and remove 3". A list of number and letter drawings
are individual parts pre sliced to make patterns on a CNC router out of
3/4 MDF.
If you are not useing parallel cooling a devider web needs
inserted in the front and center housing at 12 oclock to convert to
series cooling 1/2"wide flush with the face of the housing. No charge
for shipping but here's an idea. Anyone who wants a copy can get 1 from
you and the next guy from him etc.Consider this as open source. I am
currently interested in getting something that looks like an airframe
built while there is room for it in the hanger. I am hoping to get my
wife to do the rotary engine patterns and trips to the foundary when it
gets warmer. Plesant garden machine shop will do the machining on their
lathe and "O" ring tracks on CNC milling equipment. Then I would run a
two rotor version on a test stand for 200 hours. I don't see this all
being done in the next year so I would be glad for someone to do the
test engine for their airframe.
I didn't manage to take a flight test for a private licence back
when I had enough cross country hours. Now the rental and instruction
cost may be cost prohibative. I got a 98 on the written and then the
flight test pilot bent up his plane the day of the test and didn't care
to go flying any more that day. Then I had two engine failures in rental
planes in the same month and decided certified aircraft engines were not
in my future.
george grimes
No 3dm's came across George.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.